RESUME=0, EXICEN=0, RHST=Others, VBUSEN=0, RWUPE=0, UACT=0, USBRST=0, WKUP=0
Device State Control Register 0
RHST | USB Bus Reset Status 0 (000): In host controller mode: Communication speed indeterminate (powered state or no connection) In device controller mode: Communication speed indeterminate 0 (Others): In host controller mode: USB bus reset in progress In device controller mode: Setting prohibited 1 (001): In host controller mode: Low-speed connection In device controller mode: USB bus reset in progress 2 (010): In host controller mode: Full-speed connection In device controller mode: USB bus reset in progress or full-speed connection 3 (011): Setting prohibited |
UACT | USB Bus Enable 0 (0): Disable downstream port (disable SOF transmission) 1 (1): Enable downstream port (enable SOF transmission) |
RESUME | Resume Output 0 (0): Do not output resume signal 1 (1): Output resume signal |
USBRST | USB Bus Reset Output 0 (0): Do not output USB bus reset signal 1 (1): Output USB bus reset signal |
RWUPE | Wakeup Detection Enable 0 (0): Disable downstream port remote wakeup 1 (1): Enable downstream port remote wakeup |
WKUP | Wakeup Output 0 (0): Do not output remote wakeup signal 1 (1): Output remote wakeup signal |
VBUSEN | USB_VBUSEN Output Pin Control 0 (0): Output low on external USB_VBUSEN pin 1 (1): Output high on external USB_VBUSEN pin |
EXICEN | USB_EXICEN Output Pin Control 0 (0): Output low on external USB_EXICEN pin 1 (1): Output high on external USB_EXICEN pin |
HNPBTOA | Host Negotiation Protocol (HNP) Control |